Products – ENAIR Compressor

COOLING WATER SYSTEM OPEN E CLOSED CIRCUIT

admin — Wed, 07 Aug 2024 09:12:15 +0000

Features:

ATW

The design of the A7W (AdvancedTechnology) combines the efficiency ofaxial fan low energy with high efficiency ofheat exchange respect major competitor

LSWA

With fans in pressure. It is ideal forinstallations requiring a focus on soundlevels and allow the installation of silencers

ESWA

With axial suction. Low energy consumptionand low noise level. The heat exchangerin a closed circuit is located under the airintake grilles and is completely flooded withwater Recirculation of the secondary circuit

Single-stage Centrifugal Blowers

admin — Wed, 07 Aug 2024 09:09:51 +0000

Model	Flow Rate	Pressure rise	Pressure ratio	Power	Dimension				Weight
END Series	(M/min)	(KPa)	(E)	(kw)	L(mm)	W(mm)	H(mm)	(Kg)
END3600 ～9000	60-200	30-200	1.3-3	45-560	2600	1300	1500	~4000
END12000 ～18000	200-400	30-180	1.3-2.8	132-1200	2600	1400	1600	~5500
END24000 ～36000	400-800	30-160	1.3-2.6	300-2240	3600	1800	2200	~7500
END48000	800-1000	30-160	1.3-2.6	560-2500	4500	2200	2200	8000
END60000	1000-2000	30-120	1.3-2.2	710-2500	5000	2200	2300	10000
END120000	2000-2400	30-120	1.3-2.2	1400-3200	6500	3500	3200	15000
END144000	2400-3000	30-100	1.3-2.0	1600-5600	7000	3500	4000	18000
END180000	3000-4000	30-100	1.3-2.0	2100-7500	8000	4500	5000	22000

AIR COMPRESSOR FOR LASER CUTTING

admin — Wed, 07 Aug 2024 09:05:37 +0000

standard work codition：Standard atmospheric pressure: 1atm, ambient temperature: ≤ 40 ℃, relative atmospheric humidity: 50%, parameter table below Codice standard del lavoro: Pressione atmosferica standard: 1atm, temperatura ambiente: ≤ 40 ℃, umidità atmosferica relativa: 50%, tabella dei parametri qui sotto
Model	Rated power(kw)	rotation speed(rpm)	FAD rate (m³/min)	Exhaust pressure(barg)	cooling way	demension（mm）	weight(kg)
EBWLGI-1/16-15	15	3000	1.0	16	Air	155013501450	900
EBWLGI-1.5/16-22	22	3000	1.6	16	Air	185015001900	1200
EBLGI-3/16-37	37	3000	3.0	16	Air	310018502150	1800
EBWLGII-2/20-18.5	18.5	3000	2.0	20	Air	185015001900	1200
EBWLGII-3/20-30	30	3000	3	20	Air	310018502150	1650

* Supports heterogeneous voltage and frequency, explosion-proof design, mobile design, high cold, high heat, plateau, and high dust environment design, special gas compression design, preheating utilization design, gas heating design, special space limitations and special requirements design, and exhaust pressure design<4.0MPA.

ENAIR Tech Dry Oil Free Compressor (single satge, 2 stages and 3 stages )

admin — Sun, 07 Jul 2024 08:00:13 +0000

1. Pressure range: 0.5-4.0 mpa, ndustry-leading stages: 1-3 stages.

air end quality assurance, single-stage compression or two-stage compression energy-saving , and the airend itself is 15% – 20% more energy-saving than ordinary single-stage; accept IR air end customized.

2. 100% Oil-Free Air: Meets ISO 8573-1:2010 Class 0 air quality standards for processes within the food and beverage, pharmaceutical, textile, and electronics industries

3. Energy Efficiency: Revolutionary dual motor and “digital gearbox” design continuously monitors and adjusts airend speeds, resulting in maximum efficiency

4. Enhanced Reliability: Unique sealing design, premium airend coating, and robust components maximize uptime and ensure trouble-free operation

5. Innovative Design: Enair Tech oil free compressor adopts patented air separation technology, the oil-bearing state reaches the degree of natural air state, which can completely replace dry oil-free. The machine adopts cold dryer + cyclone technology to remove water instead of traditional interception filtration, and the effect is 5-10 times better than traditional water removal;

6. Special working condition, special compressors for gas, please write to us.

ENAIR OIL FREE SINGLE STAGE

NO.	Power (kw)	Speed (rpm)	Flowing rate (m³/min)	Working pressure (Mpa)	Cooling way	Cooling water volumn（T/H)/Inlet temp ≦30℃	Lubrication oil （L）	L（mm）	W (mm）	H（mm）	Air outlet	Inlet diameter (mm)
1	37	2970	6	0.8	w/air	7	26	1800	1500	1400	G1¼”	40
2	45	2970	7	0.8	w/air	9	30	1900	1500	1600	G1¼”	60
3	55	2970	10	0.8	w/air	10	35	1900	1500	1600	G1¼”	60
4	75	2970	13	0.8	w/air	12	45	2200	1700	1800	G1½”	80
5	90	2970	15.5	0.8	w/air	18	54	2200	1700	1800	G1½”	80
6	110	2970	20	0.8	w/air	20	70	3100	2300	2100	G2″	80
7	132	2970	22	0.8	w/air	24	72	3100	2300	2100	G2½”	80
8	160	2970	25	0.8	w/air	30	80	3200	2550	2100	G2½”	100
9	185	2970	35	0.8	w/air	35	100	3200	2550	2100	G2½”	100
10	220	2970	36	0.8	w/air	42	130	3500	2700	2300	G3″	80*2
11	250	2970	40	0.8	w/air	48	130	3600	2850	2300	G3½”	80*2

ENAIR OIL FREE TWO STAGES ACCEPT CUSTOMZIED HIGH AND LOW PRESSURE

NO.	Power (kw)	Speed (rpm)	Flowing rate (m³/min)	Working pressure (Mpa)	Cooling way	Cooling water volumn（T/H)/Inlet temp ≦30℃	Lubrication oil （L）	L(mm)	W(mm)	H(mm)	Air outlet	Inlet diameter (mm)
1	15	1480	2.9	0.8	w/air	2.5	18	1600	1100	1400	G1″	40
2	18.5	1480	3.5	0.8	w/air	3.5	18	1600	1100	1400	G1″	40
3	22	1480	4.1	0.8	w/air	4	20	1600	1100	1400	G1″	40
4	30	1480	6.1	0.8	w/air	5	26	1900	1500	1600	G1¼”	40
5	37	1480	7.3	0.8	w/air	7	26	1900	1500	1600	G1¼”	40
6	45	1480	10	0.8	w/air	9	30	2200	1700	1800	G1¼”	60
7	55	1480	12.5	0.8	w/air	10	35	2200	1700	1800	G1½”	60
8	75	1480	16	0.8	w/air	12	45	2200	1700	1800	G1½”	80
9	90	1480	20	0.8	w/air	18	54	3100	2300	2100	G2″	80
10	110	1480	23	0.8	w/air	20	70	3100	2300	2100	G2″	80
11	132	1480	27	0.8	w/air	24	72	3100	2300	2100	G2½”	80
12	160	1480	32	0.8	w/air	30	80	3200	2550	2100	G2½”	100
13	185	1480	39	0.8	w/air	35	100	3200	2550	2100	G2½”	100
14	200	1480	41	0.8	w/air	38	115	3500	2700	2300	G3″	80*2
15	220	1480	44	0.8	w/air	42	130	3500	2700	2300	G3″	80*2
16	250	1480	51	0.8	w/air	47	130	3600	2850	2300	G3½”	80*2
17	285	1480	56	0.8	w/air	50	150	3600	2850	2300	G3½”	80*2
18	315	1480	62	0.8	w/air	60	180	4100	2750	2300	DN108	80*100
19	355	1480	70	0.8	w/air	65	195	4100	2750	2300	DN108	80*100
20	400	1480	79	0.8	w/air	75	215	4300	2800	2300	DN125	100*120
21	450	1480	89	0.8	w/air	85	230	4300	2800	2300	DN133	100*120
22	500	1480	98	0.8	w/air	90	240	4900	2800	2300	DN159	100*120
23	560	1480	110	0.8	w/air	105	250	4900	2800	2300	DN159	100*120

ENAIR OIL FREE TREE STAGES （Low pressure and high pressure）

NO.	Power (kw)	speed(rpm)		flow rate (m³/min)	High pressure (Mpa)	low pressure	cooling way	lubrication oil（L）	L（mm）	W（mm）	H（mm）	Air outlet	inlet wire diameter(mm)
NO.	Power (kw)	Low pressure	high pressure	flow rate (m³/min)		(Mpa)	option	lubrication oil（L）	A	B	C	D	H
1	18.5	2970	1480	1.5	3	0.65-0.8	w/air	18	1600	1100	1200	G1″	40
2	22	2970	2060	2	2.3	0.5-0.65	w/air	20	1800	1200	1250	G1″	40
3	30	2600	2970	2.5	2.5	0.6-0.7	w/air	26	1800	1300	1300	G1″	40
4	30	2700	1480	2.6	2	0.5-0.65	w/air	26	1800	1300	1300	G1″	40
5	30	1480	1600	2.6	3	1-1.25	w/air	26	1800	1300	1300	G1″	40
6	30	2970	2080	3.4	2	0.5-0.65	w/air	26	1800	1300	1300	G1″	40
7	30	2200	2970	3.7	3	0.5-0.65	w/air	26	1800	1300	1300	G1″	40
8	37	2800	1480	3.2	2	0.5-0.65	w/air	30	1850	1400	1350	G1″	40
9	37	2970	1600	2.4	3	0.65-0.8	w/air	30	1850	1400	1350	G1″	40
10	37	1480	1480	2.4	4	1.3-1.5	w/air	30	1850	1400	1350	G1″	40
11	37	1480	1600	2.8	4	0.9-1.05	w/air	30	1850	1400	1350	G1″	40
12	37	2800	2080	3.2	2.5	0.5-0.65	w/air	30	1850	1400	1350	G1″	40
13	37	2200	2970	3.7	2.5	0.5-0.65	w/air	30	1850	1400	1350	G1″	40
14	37	1480	1480	3.4	3	0.65-0.8	w/air	30	1850	1400	1350	G1″	40
15	37	1480	2020	3.4	3	0.65-0.8	w/air	30	1850	1400	1350	G1″	40
16	37	2970	2310	4.6	2	0.5-0.65	w/air	30	1850	1400	1350	G1¼”	40
17	45	2970	2080	3.4	3	0.65-0.8	w/air	36	2000	1600	1400	G1″	40
18	45	2200	2970	3.7	3	0.65-0.8	w/air	36	2000	1600	1400	G1″	40
19	45	2970	1480	4	2	0.5-0.65	w/air	36	2000	1600	1400	G1″	40
20	45	2970	2020	3	4	1.3-1.5	w/air	36	2000	1600	1400	G1″	40
21	45	2970	2310	4.2	2.5	0.6-0.7	w/air	36	2000	1600	1400	G1″	40
22	45	1480	1480	4	3	0.65-0.8	w/air	36	2000	1600	1400	G1″	40
23	55	2970	2970	6	2	0.5-0.65	w/air	39	2400	1600	1500	G1¼”	40
24	55	1480	2970	4	3	0.65-0.8	w/air	39	2000	1600	1400	G1″	40
25	55	1480	2970	4.6	4	1.3-1.5	w/air	39	2400	1600	1500	G1¼”	40
26	55	2700	2050	5.5	2	0.5-0.65	w/air	39	2400	1600	1500	G1¼”	40
27	65	2700	2050	5.4	2.5	0.6-0.7	w/air	42	2400	1600	1500	G1¼”	40
28	65	2950	1480	6	2	0.5-0.65	w/air	42	2400	1600	1500	G1¼”	40
29	65	1480	1480	5.1	3	0.65-0.8	w/air	42	2400	1600	1500	G1¼”	40
30	65	2970	2970	7.2	2	0.5-0.65	w/air	42	2400	1600	1500	G1¼”	60
31	65	2970	2970	7	3	0.65-0.8	w/air	42	2400	1600	1500	G1¼”	60
32	65	2970	2970	5.9	2.5	0.6-0.7	w/air	42	2400	1600	1500	G1¼”	40
33	65	2970	2970	5.7	3	0.65-0.8	w/air	42	2400	1600	1500	G1¼”	40
34	65	1480	2970	5.5	3	0.65-0.8	w/air	42	2400	1600	1500	G1¼”	40
35	75	2970	2970	9.5	2	0.5-0.65	w/air	47	2800	1800	1600	G1½”	60
36	75	1480	1480	5	4	1.3-1.5	w/air	47	2800	1800	1600	G1¼”	40
37	75	2970	2970	5.4	4	1-1.25	w/air	47	2800	1800	1600	G1¼”	40
38	75	2970	1480	7	2	0.5-0.65	w/air	47	2800	1800	1600	G1¼”	60
39	75	2970	2970	7.1	2.5	0.6-0.7	w/air	47	2800	1800	1600	G1¼”	60
40	75	2970	2970	7	3	0.65-0.8	w/air	47	2800	1800	1600	G1¼”	60
41	90	1480	2970	9	3	1.36	w/air	55	3200	1800	1600	G1½”	60
42	90	1480	2970	7	4	0.8-1.05	w/air	55	3200	1800	1600	G1¼”	60
43	90	2950	1480	10	2	0.5-0.65	w/air	55	3200	1800	1600	G1½”	60
44	90	2970	2970	9.3	2.5	0.6-0.7	w/air	55	3200	1800	1600	G1½”	60
45	110	2970	2970	9.3	3	0.65-0.8	w/air	65	3300	1850	1650	G1½”	60
46	110	2970	1480	12	2	0.5-0.65	w/air	65	3300	1850	1650	G1½”	60
47	110	1480	2970	9	4	1.2-1.4	w/air	65	3300	1850	1650	G1½”	60
48	160	2970	1480	16	2	0.5-0.65	w/air	80	3500	1850	1800	G1½”	80
49	185	2950	2970	18	2	0.5-0.65	w/air	100	3500	1850	1800	G2″	80
50	185	1480	1480	20	2	0.5-0.65	w/air	100	3500	1850	1800	G2″	80
51	200	1480	1480	23	2	0.5-0.65	w/air	110	4000	2000	1800	G2″	80
52	200	2970	2970	22	2	0.5-0.65	w/air	110	4000	2000	1800	G2″	80
53	220	1480	1480	27	2	0.5-0.65	w/air	120	4000	2000	1800	G2½”	80
54	250	2970	1480	32	2	0.5-0.65	w/air	120	4000	2000	1800	G2½”	80
55	75+37	2970	2970	12	2	0.5-0.65	w/air	130	3300	1850	1650	G1½”	60
56	75+45	2970	2970	12	2.5	0.6-0.7	w/air	65	3300	1850	1650	G1½”	60
57	90+45	2970	2970	11.8	3	0.65-0.8	w/air	75	3300	1850	1650	G1½”	60
58	55+45	1480	2970	12.2	3	0.7-0.9	w/air	65	3300	1850	1650	G1½”	60
59	55+55	1480	2970	12	3	0.8-1.05	w/air	70	3300	1850	1650	G1½”	60
60	90+55	2970	2970	15	2	0.8-1.05	w/air	80	3500	1850	1800	G1½”	60
61	90+75	2970	2970	14.6	2.5	0.8-1.05	w/air	90	3500	1850	1800	G1½”	60
62	90+75	1480	2970	15.5	3.3	1.-1.25	w/air	90	3500	1850	1800	G1½”	60
63	90+90	1480	2970	15.5	4	0.8-1.05	w/air	130	3500	1850	1800	G1½”	60

ENAIR Oil Free Water Lubricating Screw Compressor

admin — Sun, 07 Jul 2024 07:53:45 +0000

Water lubricated series air compressors are used in food, medical, chemical, bottle blowing and other equipment that have requirements for compressed air. It has the advantages of clean and oil-free compressed air, simple maintenance, lower cost, all parts of the machine are made of stainless steel, ensuring no rust, adopting integrated system design and operation, isothermal compression, higher volumetric efficiency, energy saving more.

Advantage:

1. Imported Japan technology.

2. Energy saving

3. accept customized low and high pressure

4. accept explosion-proof

5. stable quality

6. easy maintenance

7. with CE mark and testing report

NO.	Motor power (kw)	Flow rate (m³/min)	relaed working pressure (Mpa)	Cooling way	Cooling water volume（T/H)	lubrication oil （L）	voltage（V）	Length（mm）	Width（mm）	height（mm）
NO.	Motor power (kw)	Flow rate (m³/min)	relaed working pressure (Mpa)	Cooling way	inlet water temp.≦30℃	lubrication oil （L）	option accpeted customized	A	B	C
1	5.5	0.8	0.8	water/air	1.5	10	380/660/1140	800	800	1200
2	7.5	1.2	0.8	water/air	2	10	380/660/1140	800	800	1200
3	11	1.7	0.8	water/air	2.5	20	380/660/1140	1200	855	1335
4	15	2.2	0.8	water/air	2.5	26	380/660/1140	1200	855	1335
5	18.5	3	0.8	water/air	3.5	26	380/660/1140	1400	1010	1340
6	22	4	0.8	water/air	4	30	380/660/1140	1400	1010	1340
7	30	5	0.8	water/air	5	30	380/660/1140	1650	1180	1500
8	37	6.2	0.8	water/air	7	40	380/660/1140	1650	1180	1500
9	45	7.5	0.8	water/air	9	40	380/660/1140	1650	1180	1500
10	55	10	0.8	water/air	10	90	380/660/1140	1800	1360	1650
11	75	12.5	0.8	water/air	12	100	380/660/1140	1800	1360	1650
12	90	16	0.8	water/air	18	100	380/660/1140	1800	1360	1650
13	110	20	0.8	water/air	20	120	380/660/1140	2200	1550	1800
14	132	22.5	0.8	water/air	24	120	380/660/1140	2200	1550	1800
15	160	27.5	0.8	water/air	30	120	380/660/1140	2200	1550	1800
16	185	32	0.8	water/air	35	160	380/660/1140	2700	1850	1800
17	200	34	0.8	water/air	38	160	380/660/1140	3000	1850	2100
18	220	37	0.8	water/air	42	200	380/660/1140	3000	1850	2100
19	250	42	0.8	water/air	47	200	380/660/1140	3000	1850	2100

ENAIR Screw Compressor Oil Injected (Fixed Speed And VS PMD Type)

admin — Sun, 07 Jul 2024 07:45:49 +0000

Our advantage:

1. Since 2005,manufacturing air compressors and have expanded 2 plants now. ENAIR team is always focus on energy saving- Stable, low noise, intelligent control.

2. oil injection rotary screw air compressor,80% components adopted global known reliable brand;

3.The core part:Screw air end,according to different market and clients required, USA Ingersoll Rand air end,origin from Germany GHH RAND and China local famous brands are available

4. Motor: adopted China strong and reliable brand IE4 or IE3 motor, with the IE4 high efficiency standard three phase induction motor, standard IP55 protection, level F insulation and level B temperature rise;

5. CE certificate oil-gas tank;

6. French Schneider electric system;

7. Sweden SKF bearings;

7.5kw-250kw PM VSD Screw Air Compressor

Low Pressure Screw Compressor 3-5bar

admin — Sun, 07 Jul 2024 07:34:20 +0000

Power: 15-160kw

Air end: Special low pressure air end, continuous operation, the compressor can work continuously for 24 hours.

Model types: Fixed speed & PM VSD

Motor: YE3 energy-saving motor is used in the design, and the motor with a service factor of 1.3

Protection grades: IP23 & IP54

Application: bottle blowing, textile industry, material transmission, sand blowing and cotton blowing by mask machine etc.

Regular model specification

ENAIR WS Aluminum Die Cast High Efficiency Water Separator

admin — Sun, 07 Jul 2024 07:31:04 +0000

Product Features

99.999% of high efficiency

cost saving

element unneeded, convenient for maintenance

patented product tested in practice

High flow rate

extremely low differential pressure

automatic drainer equipped

ENAIR Portable Diesel Compressor 29kw

admin — Sat, 06 Jul 2024 15:26:15 +0000

ENAIR diesel compressor applications and advantages

Functions: Mining, agricultural,power plant, construction, hydropower, gas and oil exploitation, sandblasting,quarry, chemical, pipeline pressure test, borehole, drilling, public work etc. Acceptable customized Explosion-proof compressors for Coal and petroleum industries.

Advantages: Compact size, convenient movement, simple operation, during working, the rated exhaust pressure is stable and reliable, no additional air reservoir is required, two wheels are preferentially recommend, which can increase the moving speed to 100km/h, and the rotation angle is 360 °. Turning around has irreplaceable advantages over four wheels.

ENAIR Portable Diesel Compressor 132kw

admin — Sat, 06 Jul 2024 15:23:13 +0000