Screw air compressor – ENAIR Compressor https://www.enaircompressor.com Thu, 08 Aug 2024 10:25:35 +0000 en-US hourly 1 https://wordpress.org/?v=6.6.2 https://www.enaircompressor.com/wp-content/uploads/2024/07/cropped-logo2-21-32x32.png Screw air compressor – ENAIR Compressor https://www.enaircompressor.com 32 32 AIR COMPRESSOR FOR LASER CUTTING https://www.enaircompressor.com/product/air-compressor-for-laser-cutting/ https://www.enaircompressor.com/product/air-compressor-for-laser-cutting/#respond Wed, 07 Aug 2024 09:05:37 +0000 https://www.enaircompressor.com/?post_type=product&p=8171 PATEDTED TECHNOLOGY ENERGY SAVING 30%

Advantage:

1.Our patented oil and water removal technology,meeting the oil-free 0 class standard, oil content in the gas less than 0.001 ppm.

2.Noise of the equipment ≤ 60dB (A)

3.High efficiency maximum power saving of 30%.

4.Longer service life: the maintenance and replacement time is 6000-8000 hours

5. The pressure range is 1.6-3.0 MPa.

6. Available model: 15kw 22kw,37kw single satge, 18.5kw 30kw 2 stages

]]>  

standard work codition：Standard atmospheric pressure: 1atm, ambient temperature: ≤ 40 ℃, relative atmospheric humidity: 50%, parameter table below

Codice standard del lavoro: Pressione atmosferica standard: 1atm, temperatura ambiente: ≤ 40 ℃, umidità atmosferica relativa: 50%, tabella dei parametri qui sotto

Model

Rated power(kw)

rotation speed(rpm)

FAD rate (m³/min)

Exhaust pressure(barg)

cooling way

demension（mm）

weight(kg)

EBWLGI-1/16-15

15

3000

1.0

16

Air

1550*1350*1450

900

EBWLGI-1.5/16-22

22

3000

1.6

16

Air

1850*1500*1900

1200

EBLGI-3/16-37

37

3000

3.0

16

Air

3100*1850*2150

1800

EBWLGII-2/20-18.5

18.5

3000

2.0

20

Air

1850*1500*1900

1200

EBWLGII-3/20-30

30

3000

3

20

Air

3100*1850*2150

1650

 

* Supports heterogeneous voltage and frequency, explosion-proof design, mobile design, high cold, high heat, plateau, and high dust environment design, special gas compression design, preheating utilization design, gas heating design, special space limitations and special requirements design, and exhaust pressure design<4.0MPA.

]]> https://www.enaircompressor.com/product/air-compressor-for-laser-cutting/feed/ 0 ENAIR Tech Dry Oil Free Compressor (single satge, 2 stages and 3 stages ) https://www.enaircompressor.com/product/enair-tech-dry-oil-free-compressor-single-satge-2-stages-and-3-stages/ https://www.enaircompressor.com/product/enair-tech-dry-oil-free-compressor-single-satge-2-stages-and-3-stages/#respond Sun, 07 Jul 2024 08:00:13 +0000 https://www.enaircompressor.com/?post_type=product&p=7326 1. Pressure range: 0.5-4.0 mpa, ndustry-leading stages: 1-3 stages.

air end quality assurance, single-stage compression or two-stage compression energy-saving , and the airend itself is 15% – 20% more energy-saving than ordinary single-stage; accept IR air end customized.

2. 100% Oil-Free Air: Meets ISO 8573-1:2010 Class 0 air quality standards for processes within the food and beverage, pharmaceutical, textile, and electronics industries

3. Energy Efficiency: Revolutionary dual motor and “digital gearbox” design continuously monitors and adjusts airend speeds, resulting in maximum efficiency

4. Enhanced Reliability: Unique sealing design, premium airend coating, and robust components maximize uptime and ensure trouble-free operation

5. Innovative Design: Enair Tech oil free compressor adopts patented air separation technology, the oil-bearing state reaches the degree of natural air state, which can completely replace dry oil-free. The machine adopts cold dryer + cyclone technology to remove water instead of traditional interception filtration, and the effect is 5-10 times better than traditional water removal;

6. Special working condition, special compressors for gas, please write to us.

ENAIR OIL FREE SINGLE STAGE

 

NO. Power (kw) Speed (rpm) Flowing rate (m&sup3;/min) Working pressure (Mpa) Cooling way Cooling water volumn（T/H)/Inlet temp ≦30℃ Lubrication oil （L） L（mm） W (mm） H（mm） Air outlet Inlet diameter (mm)
1 37 2970 6 0.8 w/air 7 26 1800 1500 1400 G1&frac14;” 40
2 45 2970 7 0.8 w/air 9 30 1900 1500 1600 G1&frac14;” 60
3 55 2970 10 0.8 w/air 10 35 1900 1500 1600 G1&frac14;” 60
4 75 2970 13 0.8 w/air 12 45 2200 1700 1800 G1&frac12;” 80
5 90 2970 15.5 0.8 w/air 18 54 2200 1700 1800 G1&frac12;” 80
6 110 2970 20 0.8 w/air 20 70 3100 2300 2100 G2″ 80
7 132 2970 22 0.8 w/air 24 72 3100 2300 2100 G2&frac12;” 80
8 160 2970 25 0.8 w/air 30 80 3200 2550 2100 G2&frac12;” 100
9 185 2970 35 0.8 w/air 35 100 3200 2550 2100 G2&frac12;” 100
10 220 2970 36 0.8 w/air 42 130 3500 2700 2300 G3″ 80*2
11 250 2970 40 0.8 w/air 48 130 3600 2850 2300 G3&frac12;” 80*2

 

ENAIR OIL FREE TWO STAGES ACCEPT CUSTOMZIED HIGH AND LOW PRESSURE

 

NO. Power (kw) Speed (rpm) Flowing rate (m&sup3;/min) Working pressure (Mpa) Cooling way Cooling water volumn（T/H)/Inlet temp ≦30℃ Lubrication oil （L） L(mm) W(mm) H(mm) Air outlet Inlet diameter (mm)
1 15 1480 2.9 0.8 w/air 2.5 18 1600 1100 1400 G1″ 40
2 18.5 1480 3.5 0.8 w/air 3.5 18 1600 1100 1400 G1″ 40
3 22 1480 4.1 0.8 w/air 4 20 1600 1100 1400 G1″ 40
4 30 1480 6.1 0.8 w/air 5 26 1900 1500 1600 G1&frac14;” 40
5 37 1480 7.3 0.8 w/air 7 26 1900 1500 1600 G1&frac14;” 40
6 45 1480 10 0.8 w/air 9 30 2200 1700 1800 G1&frac14;” 60
7 55 1480 12.5 0.8 w/air 10 35 2200 1700 1800 G1&frac12;” 60
8 75 1480 16 0.8 w/air 12 45 2200 1700 1800 G1&frac12;” 80
9 90 1480 20 0.8 w/air 18 54 3100 2300 2100 G2″ 80
10 110 1480 23 0.8 w/air 20 70 3100 2300 2100 G2″ 80
11 132 1480 27 0.8 w/air 24 72 3100 2300 2100 G2&frac12;” 80
12 160 1480 32 0.8 w/air 30 80 3200 2550 2100 G2&frac12;” 100
13 185 1480 39 0.8 w/air 35 100 3200 2550 2100 G2&frac12;” 100
14 200 1480 41 0.8 w/air 38 115 3500 2700 2300 G3″ 80*2
15 220 1480 44 0.8 w/air 42 130 3500 2700 2300 G3″ 80*2
16 250 1480 51 0.8 w/air 47 130 3600 2850 2300 G3&frac12;” 80*2
17 285 1480 56 0.8 w/air 50 150 3600 2850 2300 G3&frac12;” 80*2
18 315 1480 62 0.8 w/air 60 180 4100 2750 2300 DN108 80*100
19 355 1480 70 0.8 w/air 65 195 4100 2750 2300 DN108 80*100
20 400 1480 79 0.8 w/air 75 215 4300 2800 2300 DN125 100*120
21 450 1480 89 0.8 w/air 85 230 4300 2800 2300 DN133 100*120
22 500 1480 98 0.8 w/air 90 240 4900 2800 2300 DN159 100*120
23 560 1480 110 0.8 w/air 105 250 4900 2800 2300 DN159 100*120

 

ENAIR OIL FREE TREE STAGES （Low pressure and high pressure）

 

NO. Power (kw) speed(rpm) flow rate (m&sup3;/min) High pressure (Mpa) low pressure cooling way lubrication oil（L） L（mm） W（mm） H（mm） Air outlet inlet wire diameter(mm)
Low pressure high pressure (Mpa) option A B C D H
1 18.5 2970 1480 1.5 3 0.65-0.8 w/air 18 1600 1100 1200 G1″ 40
2 22 2970 2060 2 2.3 0.5-0.65 w/air 20 1800 1200 1250 G1″ 40
3 30 2600 2970 2.5 2.5 0.6-0.7 w/air 26 1800 1300 1300 G1″ 40
4 30 2700 1480 2.6 2 0.5-0.65 w/air 26 1800 1300 1300 G1″ 40
5 30 1480 1600 2.6 3 1-1.25 w/air 26 1800 1300 1300 G1″ 40
6 30 2970 2080 3.4 2 0.5-0.65 w/air 26 1800 1300 1300 G1″ 40
7 30 2200 2970 3.7 3 0.5-0.65 w/air 26 1800 1300 1300 G1″ 40
8 37 2800 1480 3.2 2 0.5-0.65 w/air 30 1850 1400 1350 G1″ 40
9 37 2970 1600 2.4 3 0.65-0.8 w/air 30 1850 1400 1350 G1″ 40
10 37 1480 1480 2.4 4 1.3-1.5 w/air 30 1850 1400 1350 G1″ 40
11 37 1480 1600 2.8 4 0.9-1.05 w/air 30 1850 1400 1350 G1″ 40
12 37 2800 2080 3.2 2.5 0.5-0.65 w/air 30 1850 1400 1350 G1″ 40
13 37 2200 2970 3.7 2.5 0.5-0.65 w/air 30 1850 1400 1350 G1″ 40
14 37 1480 1480 3.4 3 0.65-0.8 w/air 30 1850 1400 1350 G1″ 40
15 37 1480 2020 3.4 3 0.65-0.8 w/air 30 1850 1400 1350 G1″ 40
16 37 2970 2310 4.6 2 0.5-0.65 w/air 30 1850 1400 1350 G1&frac14;” 40
17 45 2970 2080 3.4 3 0.65-0.8 w/air 36 2000 1600 1400 G1″ 40
18 45 2200 2970 3.7 3 0.65-0.8 w/air 36 2000 1600 1400 G1″ 40
19 45 2970 1480 4 2 0.5-0.65 w/air 36 2000 1600 1400 G1″ 40
20 45 2970 2020 3 4 1.3-1.5 w/air 36 2000 1600 1400 G1″ 40
21 45 2970 2310 4.2 2.5 0.6-0.7 w/air 36 2000 1600 1400 G1″ 40
22 45 1480 1480 4 3 0.65-0.8 w/air 36 2000 1600 1400 G1″ 40
23 55 2970 2970 6 2 0.5-0.65 w/air 39 2400 1600 1500 G1&frac14;” 40
24 55 1480 2970 4 3 0.65-0.8 w/air 39 2000 1600 1400 G1″ 40
25 55 1480 2970 4.6 4 1.3-1.5 w/air 39 2400 1600 1500 G1&frac14;” 40
26 55 2700 2050 5.5 2 0.5-0.65 w/air 39 2400 1600 1500 G1&frac14;” 40
27 65 2700 2050 5.4 2.5 0.6-0.7 w/air 42 2400 1600 1500 G1&frac14;” 40
28 65 2950 1480 6 2 0.5-0.65 w/air 42 2400 1600 1500 G1&frac14;” 40
29 65 1480 1480 5.1 3 0.65-0.8 w/air 42 2400 1600 1500 G1&frac14;” 40
30 65 2970 2970 7.2 2 0.5-0.65 w/air 42 2400 1600 1500 G1&frac14;” 60
31 65 2970 2970 7 3 0.65-0.8 w/air 42 2400 1600 1500 G1&frac14;” 60
32 65 2970 2970 5.9 2.5 0.6-0.7 w/air 42 2400 1600 1500 G1&frac14;” 40
33 65 2970 2970 5.7 3 0.65-0.8 w/air 42 2400 1600 1500 G1&frac14;” 40
34 65 1480 2970 5.5 3 0.65-0.8 w/air 42 2400 1600 1500 G1&frac14;” 40
35 75 2970 2970 9.5 2 0.5-0.65 w/air 47 2800 1800 1600 G1&frac12;” 60
36 75 1480 1480 5 4 1.3-1.5 w/air 47 2800 1800 1600 G1&frac14;” 40
37 75 2970 2970 5.4 4 1-1.25 w/air 47 2800 1800 1600 G1&frac14;” 40
38 75 2970 1480 7 2 0.5-0.65 w/air 47 2800 1800 1600 G1&frac14;” 60
39 75 2970 2970 7.1 2.5 0.6-0.7 w/air 47 2800 1800 1600 G1&frac14;” 60
40 75 2970 2970 7 3 0.65-0.8 w/air 47 2800 1800 1600 G1&frac14;” 60
41 90 1480 2970 9 3 1.36 w/air 55 3200 1800 1600 G1&frac12;” 60
42 90 1480 2970 7 4 0.8-1.05 w/air 55 3200 1800 1600 G1&frac14;” 60
43 90 2950 1480 10 2 0.5-0.65 w/air 55 3200 1800 1600 G1&frac12;” 60
44 90 2970 2970 9.3 2.5 0.6-0.7 w/air 55 3200 1800 1600 G1&frac12;” 60
45 110 2970 2970 9.3 3 0.65-0.8 w/air 65 3300 1850 1650 G1&frac12;” 60
46 110 2970 1480 12 2 0.5-0.65 w/air 65 3300 1850 1650 G1&frac12;” 60
47 110 1480 2970 9 4 1.2-1.4 w/air 65 3300 1850 1650 G1&frac12;” 60
48 160 2970 1480 16 2 0.5-0.65 w/air 80 3500 1850 1800 G1&frac12;” 80
49 185 2950 2970 18 2 0.5-0.65 w/air 100 3500 1850 1800 G2″ 80
50 185 1480 1480 20 2 0.5-0.65 w/air 100 3500 1850 1800 G2″ 80
51 200 1480 1480 23 2 0.5-0.65 w/air 110 4000 2000 1800 G2″ 80
52 200 2970 2970 22 2 0.5-0.65 w/air 110 4000 2000 1800 G2″ 80
53 220 1480 1480 27 2 0.5-0.65 w/air 120 4000 2000 1800 G2&frac12;” 80
54 250 2970 1480 32 2 0.5-0.65 w/air 120 4000 2000 1800 G2&frac12;” 80
55 75+37 2970 2970 12 2 0.5-0.65 w/air 130 3300 1850 1650 G1&frac12;” 60
56 75+45 2970 2970 12 2.5 0.6-0.7 w/air 65 3300 1850 1650 G1&frac12;” 60
57 90+45 2970 2970 11.8 3 0.65-0.8 w/air 75 3300 1850 1650 G1&frac12;” 60
58 55+45 1480 2970 12.2 3 0.7-0.9 w/air 65 3300 1850 1650 G1&frac12;” 60
59 55+55 1480 2970 12 3 0.8-1.05 w/air 70 3300 1850 1650 G1&frac12;” 60
60 90+55 2970 2970 15 2 0.8-1.05 w/air 80 3500 1850 1800 G1&frac12;” 60
61 90+75 2970 2970 14.6 2.5 0.8-1.05 w/air 90 3500 1850 1800 G1&frac12;” 60
62 90+75 1480 2970 15.5 3.3 1.-1.25 w/air 90 3500 1850 1800 G1&frac12;” 60
63 90+90 1480 2970 15.5 4 0.8-1.05 w/air 130 3500 1850 1800 G1&frac12;” 60
]]> https://www.enaircompressor.com/product/enair-tech-dry-oil-free-compressor-single-satge-2-stages-and-3-stages/feed/ 0 ENAIR Oil Free Water Lubricating Screw Compressor https://www.enaircompressor.com/product/enair-oil-free-water-lubricating-screw-compressor/ https://www.enaircompressor.com/product/enair-oil-free-water-lubricating-screw-compressor/#respond Sun, 07 Jul 2024 07:53:45 +0000 https://www.enaircompressor.com/?post_type=product&p=7320 Water lubricated series air compressors are used in food, medical, chemical, bottle blowing and other equipment that have requirements for compressed air. It has the advantages of clean and oil-free compressed air, simple maintenance, lower cost, all parts of the machine are made of stainless steel, ensuring no rust, adopting integrated system design and operation, isothermal compression, higher volumetric efficiency, energy saving more.

Advantage:

1. Imported Japan technology.

2. Energy saving

3. accept customized low and high pressure

4. accept explosion-proof

5. stable quality

6. easy maintenance

7. with CE mark and testing report

 

 

NO. Motor power
(kw)		 Flow rate       (m³/min) relaed working pressure (Mpa) Cooling way Cooling water volume（T/H) lubrication oil （L） voltage（V） Length（mm） Width（mm） height（mm）
inlet water temp.≦30℃ option  accpeted customized A B C
1 5.5 0.8 0.8 water/air 1.5 10 380/660/1140 800 800 1200
2 7.5 1.2 0.8 water/air 2 10 380/660/1140 800 800 1200
3 11 1.7 0.8 water/air 2.5 20 380/660/1140 1200 855 1335
4 15 2.2 0.8 water/air 2.5 26 380/660/1140 1200 855 1335
5 18.5 3 0.8 water/air 3.5 26 380/660/1140 1400 1010 1340
6 22 4 0.8 water/air 4 30 380/660/1140 1400 1010 1340
7 30 5 0.8 water/air 5 30 380/660/1140 1650 1180 1500
8 37 6.2 0.8 water/air 7 40 380/660/1140 1650 1180 1500
9 45 7.5 0.8 water/air 9 40 380/660/1140 1650 1180 1500
10 55 10 0.8 water/air 10 90 380/660/1140 1800 1360 1650
11 75 12.5 0.8 water/air 12 100 380/660/1140 1800 1360 1650
12 90 16 0.8 water/air 18 100 380/660/1140 1800 1360 1650
13 110 20 0.8 water/air 20 120 380/660/1140 2200 1550 1800
14 132 22.5 0.8 water/air 24 120 380/660/1140 2200 1550 1800
15 160 27.5 0.8 water/air 30 120 380/660/1140 2200 1550 1800
16 185 32 0.8 water/air 35 160 380/660/1140 2700 1850 1800
17 200 34 0.8 water/air 38 160 380/660/1140 3000 1850 2100
18 220 37 0.8 water/air 42 200 380/660/1140 3000 1850 2100
19 250 42 0.8 water/air 47 200 380/660/1140 3000 1850 2100
]]> https://www.enaircompressor.com/product/enair-oil-free-water-lubricating-screw-compressor/feed/ 0 ENAIR Screw Compressor Oil Injected (Fixed Speed And VS PMD Type) https://www.enaircompressor.com/product/enair-screw-compressor-oil-injected-fixed-speed-and-vs-pmd-type/ https://www.enaircompressor.com/product/enair-screw-compressor-oil-injected-fixed-speed-and-vs-pmd-type/#respond Sun, 07 Jul 2024 07:45:49 +0000 https://www.enaircompressor.com/?post_type=product&p=7310 Our advantage:

1. Since 2005,manufacturing air compressors and have expanded 2 plants now. ENAIR team is always focus on energy saving- Stable, low noise, intelligent control.

2. oil injection rotary screw air compressor,80% components adopted global known reliable brand;

3.The core part:Screw air end,according to different market and clients required, USA Ingersoll Rand air end,origin from Germany GHH RAND and China local famous brands are available

4. Motor: adopted China strong and reliable brand IE4 or IE3 motor, with the IE4 high efficiency standard three phase induction motor, standard IP55 protection, level F insulation and level B temperature rise;

5. CE certificate oil-gas tank;

6. French Schneider electric system;

7. Sweden SKF bearings;

7.5kw-250kw PM VSD Screw Air Compressor

 

]]> https://www.enaircompressor.com/product/enair-screw-compressor-oil-injected-fixed-speed-and-vs-pmd-type/feed/ 0 Low Pressure Screw Compressor 3-5bar https://www.enaircompressor.com/product/low-pressure-screw-compressor-3-5bar/ https://www.enaircompressor.com/product/low-pressure-screw-compressor-3-5bar/#respond Sun, 07 Jul 2024 07:34:20 +0000 https://www.enaircompressor.com/?post_type=product&p=7301 The low-pressure screw compressor series is our regular products.
  • 3-5bar
  • 4.2-42.7m³/min
]]> Power: 15-160kw

Air end: Special low pressure air end, continuous operation, the compressor can work continuously for 24 hours.

Model types: Fixed speed & PM VSD

Motor: YE3 energy-saving motor is used in the design, and the motor with a service factor of 1.3

Protection grades: IP23 & IP54

Application: bottle blowing, textile industry, material transmission, sand blowing and cotton blowing by mask machine etc.

Regular model specification

 

]]> https://www.enaircompressor.com/product/low-pressure-screw-compressor-3-5bar/feed/ 0